![]() The device only accepts 8-32 V power from Passive PoE injectors (one power supply and PoE injector are included). More information about using RouterOS and connecting to this device in our documentation: *+ * Powering We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best performance and stability. ![]() In case you wish to boot the device from the network, for example, to use MikroTik Netinstall, hold the RESET button of the device when starting it, until the LED light turns off, then the device will start to look for Netinstall servers. In case IP connection is not available, Winbox can be used to connect to the MAC address of the device. You can do this in the quickSET tab that is loaded by default. The device is preconfigured as a wireless client (CPE), and all you need to do is select the AP to connect to and set a device password. Set a wireless password, a management password, and upgrade the device to the latest software with the "check for updates" button. Please select your country in the screen that loads, to ensure your device meets local regulations.The username is admin and there is no password. The default IP address of the unit is 192.168.88.1, open this address in your web browser to start the configuration.Set LAN computer IP configuration to automatic (DHCP).Plug the included power supply into the PoE injector to start up the device.Plug the PoE injector into your network switch or computer.Open the ethernet door to connect an ethernet cable to the ethernet port, connect the other end of the ethernet cable to the included PoE injector.This door can be also secured shut with a screw in the provided screw hole. The SXT device has a sliding door, behind which the Ethernet port and the reset jumpers are located. Two screw holes are provided as additional security against accidental bracket movement. Tighten the hose clamp screw when alignment is complete. The SXT comes bundled with a hose clamp, guide the clamp through the opening in the bracket and around the pole where it will be mounted. With the clip pointed forward, slide the mounting bracket into the rail on the bottom of the case, until the clip clicks into place. Please ensure the device is correctly mounted, with the cable pointing straight down. SXT series: SXT SA5, SXT SA5 ac SXT is an outdoor wireless router that can be used as a CPE in a PtM setup, or for point to point links.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |